1 / 3
Brake Rotor Removal Screw Case (M8 x 1.25)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brake screw and hex key case
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a case to store a couple of M8 x 1.25 x 25 SHCS and a 6mm hex key. It makes it easy to find them when I need them during brake service to remove rotors. Note, the hex key is 90mm long. The hinges are aligned using 1.75mm filament.
0.4mm nozzle, 0.2mm layer, PLA, Sovol SV05