Seekone Heat Gun Holder for HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As titled. Dimensions in description to see if it will fit your heat gun/hair dryer. Fits in 2 or 3 open inserts.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 136
- Wydruki
- 1
- Wyświetlenia
- 764
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Cup-shaped holder for the Seekone 1800 watt heat gun. It should probably fit a wide variety of tools with a “pistol grip” form factor. The cup is a nice thick 2mm shell. The internal dimensions are 71mm diameter for the top cup (50mm high), a lip cutting it down to 63mm over a 3mm transition, and then gradually reducing to a 57 mm diameter over the 55mm height of the bottom cup. The cutout for the grip is 36mm wide.
The version pictured has an error - the bottom brace hex is too small to fit into the Open Insert component of the HSW. It still works to brace it against whatever you have behind the HSW, so I didn't reprint it for my use - but the FreeCAD file and the STL have been corrected, so your print will be right.
You'll need supports for the cutout, the lip, and that bottom hex (top during print, bottom as used), but standard supports should come off fairly easy - see the last picture for the supports I used. Having the heat gun actually in the cup will help hold it firm while you're trying to force it into the wall.
Shoutout to Daniel Valadas and his HSW plug holder (https://www.printables.com/model/632139-hsw-plug-holder) for a companion piece to keep the cord organized.