Love Key Fob with quote from Terry Pratchett's Death
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I received a Valentine's card with this quote on it, they definitely know me :) I thought I'd try to make something...
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 787
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
I received a Valentine's card with this quote on it, they definitely know me :) I thought I'd try to make something printable with the quote.
It's a little large for the average key fob, I'm thinking it would work better as a thinner design and bookmark with the heart poking out of the top of the book and a very small layer with the text. I don't have the time in the next couple of days to print several tests of that idea though.
This is the 4th iteration I came up with, the text ought to be large enough to print clearly on a 0.4mm nozzle without the Cura setting Print Fine Lines enabled (and equivalent in other slicers but I haven't tested it without that enabled).
I haven't done any post processing on the print I've taken a photo of.
PRINT SETTINGS:
I printed mine rather quickly as I only had today to design and test print several times, so you should be able to get a better initial result than I did. My final print was:
0.1mm layer height
Pause for a filament change after 2mm, or before layer 21 (or before layer 20 if your initial layer is 0.2mm. Check your layers in the preview before committing to layer pauses anyway but the part before the detail is 2mm high), if you want the dual colours.
Probably use lower speeds for inner and outer walls than I did to get clearer lettering. Mine were set to 150 and 100mm/s and whilst it didn't print that fast given other settings, I think the last 5 layers (if you are printing at 0.1mm layer height) would be a lot better at 30mm/s.