SOTA guy winder + tensioner for guying your mast
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use to tension guys for a sota mast and then coil the guy to stow. Prevents a tangle / birds nest.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 533
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A summits on the air guy winder + tensioner for guying your mast.
Are you tired of you guys or cord used for guying a mast getting tangled with each other ?
This is designed to provide an adjustable guy with a winder to wind the cord when stowing or between summits.
Two versions:
- One with an “open jaw”. You can use this to cleat the guy when winding
- “closed jaw” you need to coil and hitch the end of the guy when winding onto the winder.
Makes deployment of a mast so much quicker and no mess of a tangle of cords to sort out on the next summit.
Works perfectly with sotabeams “Hi Viz Antenna Cord”. Also tested with 2mm paracord. I like to use lightweight cord and print with low infill (25%) to keep everything as light as possible.
Freecad files if you want to adjust, potentially for thinker cord.
I felt that a thiner guy winder would be adequate, so i reduced a version to 2.8mm thick!