Bose Soundlink Flex mounting bracket (and mounts for MGI Navigator Ai Golf trolley)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for Bose Soundlink Flex bluetooth speaker w/ clamps for attaching to the MGI Navigator Ai Golf Trolley
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 254
- Wydruki
- 0
- Wyświetlenia
- 2013
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount for the Bose Soundlink Flex bluetooth speaker. I wanted to attach it to my electric golf trolley - the MGI Navigator Ai. So I created the bracket for the speaker along with parts to attach it to the trolley. If you are simply looking for a bracket for the Bose speaker, you are in luck as you can take what I have created and use it to attach to just about anything. I created holes that fit M6-16mm screws perfectly.
Additional parts you should get:
- M6-16mm screws (6 needed)
- M6 nuts (6 needed)
- Wrap-It 9" storage straps (only 1 needed)
Included in the files are three separate pieces (two of which need to be printed twice):
- The main Bose speaker bracket
- Left mounting bracket to MGI golf trolley (print 2 of these)
- Right mounting bracket to MGI golf trolley (print 2 of these)
Instructions:
- I printed using PLA on a Bambulabs X1C. I used 0.20mm Strength setting and I did use supports (to ensure the holes were just about even and could fit the bolt.
NOTE: I included the STL files if you just want to print them but also included the Autodeck Fusion 3D files as well in case you want to modify/extend.