AOS 3.5 (V2,EVO&V5) O3 Antenna Mount & XT30 Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a good design to change the angle of the antenna mount.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 782
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very clean install as you can see from the photos.
I prefer this to the 3D printed XT30 mount provided by IFlight/Chris Rosser as this allows for a more central battery position (centralizing the weight balance) and also this design does not interfere with a front mounted stack like the IFlight/Chris Rosser XT30 mount design.
It also hold the antenna which i changed from the orgnical design to be mounted on a angle, works really well with the FlyFish O3 40mm Antenna.
Optional Standoff covers go under the antenna mount to stop it from moving up and down.