Bento Peg leg, Rigid Barrel connector and Switch .
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a small insertable peg leg to the bottom of the base to affix the whole assembly to the base and more.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 431
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have added an insertable peg leg to the base to make the connection to the bottom of the print chamber a LOT more rigid. It's a tight fit. Press the peg into the bottom of the base. Then align the angle and fit the leg where it should fit snugly.
With the leg inserted into the base of the Bento and the original shipping recess in the bottom of the print chamber, it feels like the thing is screwed in.
I have also made an exact fit for a switch and a rigid lock for a barrel connector in the back to be plugged into the back of the chamber.
I recommend printing the main body with tree supports enabled. It will make the overhang for the switch look much cleaner; it's not really required as the potential imperfection there will be hidden by the switch.