Jupiter Lamp for Bambu Lab LED Kit 001
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Ryno600's Jupiter Lamp to use the original Bambu LED Lamp Kit 001 – or a clone.
- Ocena
- 0 / 5
- Polubienia
- 116
- Pobrania
- 535
- Wydruki
- 1
- Wyświetlenia
- 2805
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
I like Ryno600's Jupiter Lamp, but I wanted to use the original Bambu LED Lamp Kit 001, so I made this remix.
You can use it with the original Bambu Lab LED Lamp Kit 001 – or a clone like this from AliExpress. which is much cheaper.
I wanted a two color version. If you don't have a MMU or AMS you can easily do a filament color change at 7.4mm. Or just print it as single color.
I used Bambu PLA Basic Beige with .2mm layer height without support. I highly recommend to use a big (!) brim to ensure good bed adhesion. The ball needs 100% infill, I used concentric, which worked great.
I also uploaded the 3mf file.
Tip: If you don't like the final hue or brightness of the lamp just print a thin cylinder in another color and place it directly on or inside the LED puck to change the hue and brightness.