1 / 2
2 inch Aero Bar Support — zdjęcie 1
1 / 2

2 inch Aero Bar Support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made these to raise my aerobars for an upcoming Ironman race. REINFORCE BEFORE USE. 8 layers of Carbon worked well.

Ocena
0 / 5
Polubienia
5
Pobrania
75
Wydruki
0
Wyświetlenia
1512
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I made these to raise my aerobars for an upcoming Ironman race. REINFORCE BEFORE USE. 8 external layers of Carbon with epoxy per each support worked well. I also recommend using an old bike tube between the riser and the handle bar to help keep the aerobats in place. 

I don't think these are strong enough to use without reinforcement so please don't try it and get hurt.

Feel free to reach out with any questions about the carbon fiber lay-up. I can post additional pictures of the process if there's interest.

Printed on Creality Ender 3 V3 SE

Tagi