1 / 6
Filament hygrometer case - for storage/humidity Info
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flexible hygrometer that allows for viewing the humidity of a typical sized 1KG vacuum-sealed filament spool.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
A simple hygrometer mount for filament when stored in vacuum-sealed bags.
I was looking for a good way to see the humidity of stored filament when on it's side that works with slightly different sizes of 1KG spools. I store mine all side-by-side so this saves me from wondering if I need to dry the filament!
- Bumpers are printed in TPU
- Should accommodate most standard-size spools, from about 55-62mm wide.
Hygrometers used:
- I purchased a multi-pack of cheap hygrometers from Amazon; there are many different ones for sale that appear to be the identical design to what I got.
- If you can't find these, here are a few ASIN#s for Amazon products that look to be identical:
- B0CGHRMGVV
- B08P3QJJZL
Hardware I used:
- 4pcs M3x10mm screws
- 4pcs M3 Nuts
Printing:
- I used supports for the case body when printing; found that organic supports were the easiest to clean up in PrusaSlicer.
- I use indicating silica gel in an organza bag to keep things tidy.
Happy printing!