CNC 3018 Pro Circuit Board Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CNC 3018 Pro Circuit Board Enclosure Protective box with cooling fan mounting for Cronos and similar CNC/Laser…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 364
- Wydruki
- 2
- Wyświetlenia
- 1891
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
CNC 3018 Pro Circuit Board Enclosure
Protective box with cooling fan mounting for Cronos and similar CNC/Laser electronics board which have mounting holes 90mm x 76.5mm spacing.
Note: if your electronics board is narrower, with 75mm x 76.5mm mounting hole spacing then there is a box which might fit with thing:3291676.
I will be releasing a set of cable clips and ducts to go with this board shortly, when I have finished testing them.
If you have already assembled you 3018 then I suggest tacking the circuit board fixing nuts in place with impact adhesive so that they do not move when you fit this enclosure.
I include files for lids with alternative mountings for cooling fans. It is important to use a fan so that the electronics will last longer. The box has extra space on the right-hand side so that you can coil surplus cabling. You should use a cable tie to keep it together so that it is kept clear of the fan.
My CNC 3018 Pro Things
- Circuit board housing Thing:3886992
- Cable Tidy Set Thing:3888299
Limit Switch Set Thing:3896500 I design these things for myself but I have published them for you. If they make your life easier or save you money then please do not forget to "Tip Designer"!
Print Settings
Printer:
Any
Rafts:
No
No
Resolution:
0.20 or 0.25 layer height
25%
Filament: Any Any filament. I used ABS
Category: 3D Printer Parts