Loom channel section for custom loom size
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print as many of these as you want as fasten to a bar of wood to make your own loom
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
My wife wanted to make her own loom of a couple different sizes. By printing several of these and fastening them end-to-end, you can make the top and bottom bars however long you want and weave whatever size cloth you feel like doing. She is using 25mm square pieces of wood.
One piece is 110mm. If you print it tall, standing up, you won't need supports, but the teeth might be more likely to break off along layer lines. If you print it flat on its back, you'll need supports for every tooth, which will be irritating to post process. But they'll be less likely to break. Either way, having them in sections like this means if one does break, you'd only need to reprint one section instead of a really long part.