Spool Holder

Spool Holder

I needed a spool holder for winding filament onto another spool. I could not find just what I was looking for so I have modified Danimal_FPV's design,

1. lengthened the base to make it more stable,
2. added some holes in case you want to screw it down to a work-bench,
3. changed the geometry to strengthen the design
4. replaced the axel with a smoother cylinder.

5. raised the top of the forks which hold the axel, to make it less likely to jump out. There are spindles in various sizes to allow spools with large holes to rotate smoothly.

   Joiners for Multiple spool holders

---

There is a joiner to link two spools in series for winding filament from one onto the other.
Also a joiner to link spools in parallel as you may need in a dry box or feeding printers with multiple extruders. The joiners may be attached to the spool holder bases with M4 x 16mm machine screws and nylock nuts (or the imperial equivalent).

Printing

PLA is a good material to use for this because it provides a slippery and durable surface for the rotating bearings. You need good layer adhesion so do not print in ABS.

I was in a hurry to print this so I used a 0.8mm nozzle and 0.3mm layer height. This gave me issues of the plastic curling about three quarters of the way up the print as you can see from the photograph. If you use a standard 0.4mm nozzle and not more than 0.25mm layer height it will be okay.

Spindles are provided in various diameters from 50mm to 76mm. Print the one which is closest to but smaller than the hole in your filament spool.

My Dremel 3D Printer Things

• Spool winder for Dremel spools Thing:3793381
• Manual spool winder Thing:3918099
• Dremel compatible spool. Standard size Thing:3922866
• 1Kg Filament in Dremel 3D45 Solution #1 Thing:3818976
• 1Kg Filament in Dremel 3D45 Solution #2 Thing:3835745
• MasterSpool for filament refills Thing:3875917
• Build Plate for Dremel 3D45 Thing:3851463
• Nozzle Box, 9 - 27 larger nozzles Thing:3831799
• Spool Holder Thing:3823334
• Filament Guide Wheel for Dremel 3D45 Printer Thing:3806514
• 80mm Air Filter for Dremel 3D45 Thing:3802160

• 15 Labels for Filament Thing:3786182 I design these things for myself but I have published them for you. If they make your life easier or save you money then please do not forget to "Tip Designer"!

  Print Settings

Printer:

Any

Rafts:

Supports:

No

Resolution:

Filament:

. PLA or PETG

Category: 3D Printer Accessories