1 / 8
Table side 1HE/U rack mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick to print, mount for a 19"/10" rack device like a switch to a table or other furniture, with your own nuts :)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I needed a way to mount my 19"(10" should work too) Switch to my TV Board. I came up with this solution, just print both pices, clip your racknuts into place, screw it to your device, then mount it with standard screws on your furniture. This way you can mount any 1HE/U device to every furniture, as long its not to heavy. I found out that its also not required to screw the holder into the furniture, but i would recommend it.
How i printed mine:
- Material: PLA (PETG, PLA+ might be better)
- Layer Height: 0.2
- Infill: 50%
- Orientation: Top down