Replacement Towers for Die Wandelnden Turme (The Wandering Towers) board game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement towers for The Wandering Towers board game
- Ocena
- 4,5 / 5
- Polubienia
- 36
- Pobrania
- 364
- Wydruki
- 2
- Wyświetlenia
- 2258
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Problem statement
The stock cardboard towers that come with the Wandering Towers board game are hexagonal and so, if they're not aligned, you cannot stack them. Considering this is a core gameplay mechanic this is pretty annoying. So I wanted to create some round towers.
These were heavily influenced by @jaw0012_678649's tower model here: https://www.printables.com/model/476280-the-wandering-tower-die-wandelnden-turme-upgraded- although I did redesign them from scratch to incorporate my preferences, namely:
- No glueing*
- Slightly better resemblance to the stock towers, by incorporating windows, doors, machicolations (there are so many specific words for the bits of a battlement!)
So the main modification is the 45 degree overhanging bits ("corbels", apparently) which supports the parapet and avoids glueing. I had no trouble printing this and I assume most modern 3d printers are okay with a 45 degree overhang; if not, then I've included a Fusion 360 design file if you'd like to tweak it.
There are 2 variants of the towers: plain and one with a recess for a raven shield (escutcheon, perhaps?) which can be attached… somehow (*yes I realise I said no glueing…).
I did not design a replacement for the Raven Castle because, frankly, I think that @jaw0012_678649's version of Gediminas' Tower (on this page, "Wandering Tower Castle.stl") is just perfect and that's what I use.
Files provided
- Turm.f3d - Tower with recess for shield, parametric design file
- Turm.3mf - Tower with recess for shield, manufacturing file
- Turm_NoShield.f3d - Tower with plain roof, parametric design file
- Turm_NoShield.3mf - Tower with plain roof, manufacturing file
- Ravenshield.f3d - Shield, parametric design file
- Ravenshield.3mf - Shield, manufacturing file
NB. My apologies if you're looking at the brick pattern design from the design file, I found it surprisingly difficult to convince Fusion to do what I needed it to do parametrically and I had to resort to some more manual workarounds.
Slicing recommendation
- Nozzle:
- Towers: I used a 0.4mm nozzle which preserved the detail well.
- Ravenshield: I used a 0.25mm nozzle which just about managed to produce the detail. (in retrospect maybe the shield and the associated recess should be a little larger, especially if you're perhaps limited to a larger nozzle, but for my purposes it works well)
- Supports:
- Towers: Because of the hollow interior, I strongly recommend supports unless your bridging game is super strong… I personally used:
- a “Smart fill” support enforcer on the underside of the platform only
- supports for support enforcers only
- “snug” supports
- this worked perfectly, seriously, the supports were so satisfying to remove from this model for some reason…
- Towers: Because of the hollow interior, I strongly recommend supports unless your bridging game is super strong… I personally used:
- Colour change:
- Ravenshield: I printed the bottom 0.2mm (default scale from design file) in black and the rest in blue to match the game art.
Assembly
- So yes, there is some glueing for the ravenshield but it's not structural, which was my real objective.
PS. In picture 1 there are some replacement potion counters that I have designed as well, you can find them here if you're interested.