Diabolical Dragon Snake - Articluated - Print in Place - No Supports - Flexi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm glad to present you the Dragon Snake 🐉🐍 Easy to print without Supports, just slice the file and get started
- Ocena
- 0 / 5
- Polubienia
- 36
- Wydruki
- 0
- Wyświetlenia
- 1118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Standard Digital File License
I'm glad to present you the Dragon Snake 🐉🐍
Easy to print without Supports, just slice the file and get started
The Joints are strong and sturdy.
You get a creature with fully articulated body & this Snake / Dragon has a Crystal Tail.
It's scaleable, please make shure the joints and mechanics work (tested with 80% scale)
Have fun with this print.
Don't forget to like & rate ❤.
Please share your make with me 🙂
This design is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially
If you are interested to get access to my whole Design Library & the commercial License to sell the printed modell check out my Patreon or Printables Club Membership.
Please note that you only have a commercial license with active patreon or Printables Club subscription & it is absolutely forbidden to share the digital Files!
Filaments I recommend:
Formfutura
Yousu
TriColor
DualColor
FDM Settings
A leveled bed is required for a nice result
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
I recommend to activate the Z-jump 0.3-0.5mm for more safety