Taylors Large Tea Bag Dispenser

Infill: 15%

Support: build plate only for the non-magnetized version; tree supports from the build plate for the magnetized version

If you chose to print the version with magnet holes, they should work with any 10x3mm magnet and can be glued in place.  I used these, personally: https://www.amazon.com/gp/product/B084VGP2LY/

Inspired by the many other tea bag dispenser models available here.  I was struggling to find a version that was large enough to accommodate the 90x75mm large tea bags from Taylors of Harrogate, so I decided to use this as an opportunity to design my first ever model.

I uploaded two versions of the model for use with magnets: one with the holes on the inside of the model and one with holes on the outside of the model.  Using the one with the holes on the inside might work OK on a fridge if you populate all four holes with magnets, though it really works best when using an actual wall-mounted magnet bar (like the kind used to hang kitchen knives).  The version with the holes on the exterior will require you to glue the magnets in place but should work better for mounting to regular objects like refrigerators. 

I tried to avoid the necessity of support material as much as possible, though I still chose to generate some from the build plate when I printed mine to ensure the opening at the bottom of the dispenser comes out properly.

Since this is my first ever model, I welcome all constructive feedback as to how I can improve the design; I want to learn if you are willing to teach!  Otherwise, I hope you find this model useful.