G305 superlight - ultra light g305 custom shell | NOT FINISHED DESIGN
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ultralight shell for large hands(claw palmgrip mix)based around the g305 motherboard, inspired by the G Pro X Superlight
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 1404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
at the moment this design just barely works, but i do intend to upgrade and make it much easier to print and assemble.
ASSEMBILY:
- dissassemble g305
- hot glue mouse clicks into holes on pcb (look in photos for reference)
- screw pcb board onto mouse base
- solder cr2032 battery holder onto jst connector
- hotglue battery holder to the back of the base of the mouse
- superglue top shell onto bottom shell ( i know i need a better way of doing this)
- use soldering iron to fuse side buttons onto side of mouse, (use an untinned solder tip to do this (i used a copper tip that i only use for fusing plastic) ( you could also use the heated up hotend of your printer)
- use heat gun (verry gently) to slightly melt where the clicks meet the top of the mouse so that the clicks rest over the switches without any pre travel ( and to stop them from achuating the main switches without being manually depressed
- apply some skates
To anybody that wants to print this; i wish you luck
also the design is “parametric” you might be able to change the shape *SLIGHTLY to better fit your hand. still quite new to cad so maybe ill make it much better int he future \_(ツ)_/
UK shopping links, if you cant get ahold of them id recommend finding equivalents on your local marketplace
https://www.ebay.co.uk/itm/185544786888
https://www.ebay.co.uk/itm/283117054906
i used my own lithium battery charger module from china, you can also get cr2032 kits which come with batteries as well as a charger.