1 / 4
Sanding wedge for 46mm x 280mm sandpaper, printable without support material
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is designed to use 46mm x 280mm sandpaper strips, and it is printable with no supports
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
This model was is a remeix of the model of @JG3Dcreations who remixed @RalfHorhager.
This model uses, as the version it was remixed from, a M6x30 hex bold and one M6 nut.
Prints without support material. Layerhight should be 0.2mm, for the knob increase perimiters to 4. Grit number can be adjusted in Prusaslicer
Printed on Prusa XL in Prusament PLA.