102mm refractor scope rings and dovetail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scope rings for 102mm refractor and 9 inch long dovetail .stp files included for customization
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a set of telescope rings and a long dovetail for my 102mm refractor, I didn't want to spend $100 for a set of metal rings that “might” fit. So I designed my own!
I printed the rings and dovetail in ASA from Overture, I wouldn't recommend PLA due to the dew/moisture that is ever present during stargazing and may structurally fail at one point.
For the rings I also used Archimedean Chords for the bottom and top fill patterns as well as gyroid infill for the flexibility advantages, I don't know if this actually helps but so far it works great.
I added the .step files in case you want to change things, let me know if there are any issues!
Hardware used:
Rings-
8x - ¼-20 x 1" socket head screw cap bolts
8x - ¼-20 nylock nuts
Dovetail
4x - 5/16-18 x 1" socket head screw cap bolts
4x - 5/15-18 nylock nuts
Thanks and Clear Skies!
Stampy