*OLD* Tool-Grid 10pc 22mm Wheel Lock Key Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
** NEW SET HAS RELEASED ** OLD DESIGN
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Wheel Lock Key Holder for Matco Tool-Grid Tool Box organizer system. Holds 10 22mm Hex Wheel Lock Keys however I made the diameter of the sockets 26mm for a loose fit and ease of inserting and removing the keys from the holder as well as slightly curved edges everywhere for appearance. The bolts that come with the Tool-Grid kit will work perfectly fine with this and both holes are useable as long as the print comes out alright of course. I'm Planning on making a holder for individual keys.
WILL NOT SCALE (effectively), it will cause the Tool-Grid mounting holes to be improperly aligned and sized.
- Basic Print Settings
Material: PLA
Layer Height: 0.20mm
Infill: 15%
- Dimensions
Height: 13mm
Length: 180mm
Width: 74mm
- Socket Dimensions
Diameter: 26mm
Depth: 10mm
Surface Height: 3mm