Detachable Hinge for Pop Top roof beds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple detachable hinge to secure the bed at one end, but be able to lift it out of the hinge when needed.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
When fitting gas struts to my pop top bed in my converted VW T5, I had an issue that the bed was pulled away from the end. As I need to get to the end to loosen and tighten the straps for the pop top to go up and down, I couldn't use standard hinges.
So I decided to make my own.
The hinges are quite heavy duty, but you can always add additional ones or remix it yourself.
I printed in PETG with a 0.6mm nozzle and 0.3 layer height, supports from bed only, just to keep it smoother.
The size of the hinges leaves a gap of around 50mm, enough for you to get fingers in to loosen or tighten the straps, but if you need to move the bed more, just lift the hinge out and slide the bed forward.