Campervan table holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I simple set of brackets to stow a campervan table to a flat surface.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 279
- Wydruki
- 0
- Wyświetlenia
- 1644
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple design to stow a folding table against the tailgate/rear door of a camper. There are many of these types of bracket on sale on ebay, but its cheaper to make it yourself.
Printed in PETG for a bit of strength (ABS would probably be better), with a 0.6mm nozzle with a 0.3mm layer height.
The models include some backing plates to fit behind the tailgate interior cover if the fixing isn't strong enough (mine was carpet covered hardboard). You will need to print 2 corners, 2 clip bases, 2 clip tops and 8 screw blanks. The Clip top just uses a M4 20 screw to screw to the base, although you may want to add some locktite or a slightly longer screw.