OpenDTU / AhojDTU Case (Hoymiles)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a casing for an OpenDTU / AhojDTU made from 3 parts. This allows you to read the inverter data of your Hoymiles.
- Ocena
- 4,667 / 5
- Polubienia
- 6
- Pobrania
- 191
- Wydruki
- 4
- Wyświetlenia
- 1678
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is a casing for an OpenDTU / AhojDTU made from 3 parts. This allows you to read the inverter data of your Hoymiles inverter e.g. for a balcony solar panel.
For ordering the right electronic components see pictures. I ordered everthing on Aliexpress.
- I assembled the housing parts with M3 metal inserts and fitting screws (M3x10).
(The bottom plate is dedicatedly only using 3 screws, because of an installation space collision withthe ESP32 board.)
- The NRF24 module is just fixed by its own antenna and doesnt require further screws.
- The ESP32 board requires some small plastic screws that I reused from some old remote control.
- The display is mounted with M2,5 metal inserts and fitting screws. (from some old electronics)
- Since only a part of the display is used, I added a black tape to the bottom part for better optics.
The housing is designed with an intentional gap between the two parts for a dedicated shadow-line.
For documentation see (both variants should be possible, I used OpenDTU):
- AhojDTU: https://ahoydtu.de/
- OpenDTU: https://github.com/tbnobody/OpenDTU
Since this modelling took quite a lot of time, please consider a small contribution to my Paypal. It would be well appreciated :)