Sophos XG/XGS Rackmount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a rackmount that can be screwed onto the side of a Sophos XG / XGS 106/107 device
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 231
- Wydruki
- 0
- Wyświetlenia
- 2302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a rackmount that can be screwed onto the side of a Sophos XG / XGS 106/107 device. It will likely fit on a few of the other smaller variants too.
It sits pretty close to the rack side, and thats for a reason - its made to work with the modular design by MyStoopidStuff on TV.
There's another model to go on the right side which will fit a TP-Link switch. OR You could take the model and s-t-r-e-t-c-h it to fit your specific rack and flip it to print both sides.
I've uploaded the F360 file as well, so feel free to make some modifications to it (make it wider, etc) if required.
To print, rotate it -90 on the Y-axis to get it flat. No supports required, 20% infill. You'll need 3mm bolts, 7-10mm in length with a tapered head to affix it to the Sophos unit. 10mm max to stop it from damaging components inside.