Hasselblad 500 Series Shutter Button Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for the threaded shutter button on the older larger Hasselblad 500 Series Cameras
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
For the life of me I could not find a “soft shutter button/cap” that fits the 500 series cameras with the larger holes, so I made my own! This insert you can just screw in and it will hold very tight.
I recommend to print it out of TPU, either 90 or 95 works really great, screwing it in has the TPU grip on the thread without much force. For best feeling I recommend to use a textured PEI plate or similar, let me know which feels the best!
Big platform towards the bottom while printing, no supports needed.
My print settings:
TPU95
0.16 Layer Height, 0.4mm Nozzle
no supports, no brim
Please let me know if you'd like any changes!