Umarex Notos Magazine and tools holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Mags for this Carbine are petite, and a little delicate... This holds everything in place quite nicely.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 955
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
To be PERFECTLY clear, this is for a pellet gun. An AIR rifle.
I love the rifle. Between my boys and mine, we have 3 of them.
Not a huge fan of the Magazines though...
This holds 3 mags, the filler adapter, and the single shot ramp nicely in their own respective spots without damaging the o-rings of the adapter.
NOTE. the little disc and the tube are printed with TPU 95a. The disc goes into the mag holder with some glue just to protect the end of the adapter, and the tube is held in with friction.
The Magnets I used are a 6x3mm neodymium. Held in place with a drop of superglue.
I printed them with ASA, .32mm layers, 3 walls, 3 tops and bottoms, organic supports, on my K1 Max.