Helical waves lamp shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This geometry was designed to fit a leftover socket, which was missing a lampshade. It might fit other lamp sockets ...
- Ocena
- 5 / 5
- Polubienia
- 320
- Pobrania
- 1622
- Wydruki
- 11
- Wyświetlenia
- 6375
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This geometry was designed to fit a leftover socket, which was missing a lampshade. It might fit other lamp sockets as well. If you intend to use the geometry as a vase, there is also a version with a mounting hole included. Geometry was created using a parametric model in Rhino/Grasshopper. The model is solid and is intended to be printed in vase/spiral mode. It might be possible that the mounting hole doesn't appear during slicing (only tested with PrusaSlicer 2.7.1).
Dimensions:
mounting hole diameter: 40mm
diameter: 110mm
height: 205mm
Geometry created with Rhino/Grasshopper.
Print Settings
Printer: generic
Rafts: No
Supports: No
Resolution: 0.3 mm
Infill: no, use vase/spiral mode
Filament: generic PLA
Notes:
Default settings with a 0.2/0.3mm layer height should work. Activate vase or spiral mode in your slicer. Supports are not needed.