Led Strip Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting rails for ledstrip with sliding parts
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 882
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The led-strip rail designed for ceiling.
It is for mounting 8mm led-strip
I used the 22.5-degree angle mounts for against a ceiling that has angle ~30 degree
The V1 version is sliding in the other direction, a V2
the 45 and 90-degree angle is sliding in the same direction as V2
In The V2 version, first mount the block(s) against the ceiling or wall, then slide the led-strip-holder on.
Print first one mounting block to test if it fits in the led-strip holder.
If it is too big, change the x-y-contour to -0.15mm ~ -0.25mm
In my case ABS fitted exact, with PLA I needed to change the XY Contour to -0.2mm