Low Profile PTFE Filament Port for PC4-M10 Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low profile filament port for PC4-M10 PTFE (bowden tube) fittings
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a very low profile filament port with a PC4-M10 fitting, so I made one. Why? I like PC4-M10 fittings I guess \_(ツ)_/ Pairs great with @katthulu's Spool PTFE holder, or my remix for… can you guess it? PC4-M10 fittings!
I designed this specifically for my Lack Enclosure V2 but it should work on enclosure with material less than ~4-4.5mm thick. Fits Straight-Thru (and not) style fittings and standard 4.0mm OD ptfe tubing (eg. Capricorn XS or Capricorn Filament Guide). I imagine this could be flipped over and used as a mount for a Reverse Bowden too if someone were so inclined.
Requires cutting a ~1 x ~1in (25.4 x 25.4mm) hole in the top of the Lack enclosure (see last photo). Prints perfectly with 0.6 and 0.4mm nozzles, anything larger than 0.6 might make the collar difficult to print.