1 / 4
Joie baby carriage bar mount repair — zdjęcie 1
1 / 4

Joie baby carriage bar mount repair

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A bar broke at the welding seam on my baby carriage. This is a mount to fix it.

Ocena
0 / 5
Polubienia
1
Pobrania
21
Wydruki
0
Wyświetlenia
429
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I printed it on my Prusa XL in PETG with PLA support, but it is also possible to print any other printer and normal supports.
It is recommended to choose the print orientation at 45° (not as in the photos, but as in the 3mf). This should improve the stability even more.

I printed it from Prusament PETG Jet Black with 4 Perimeter 20% Infill - Gyroid.

I have used 8 M3x16 bolts and 8 M3 nuts. There is one more hole for a M3 bolt where you can drill into the 45°-rod before and than secure the bracket. But for me it works fine without it.

The fusion file is very messy, but I hardly had time and maybe it is still helpful for someone.

Tagi