Artillery Sidewinder X4 - Filament Sensor Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended mount for the Filament Runout sensor - so it does no longer guide the filament against the extruder cable clips
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 273
- Wydruki
- 1
- Wyświetlenia
- 2124
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This new mount repositions the Filament Runout sensor, because the original one guides the filament directly onto the extruder cable connector on the extruder.
It basically is a 20mm extended part, made to be printed without support and it is more silent because it is out of plastic and not metal.
If some changes are needed or you have other ideas, feel free to contact me!
Another part (you can see the result on the pictures) is the new cable strain relief, that lets the extruder home and get to Z=26cm without touching the frame with the cable:
https://www.printables.com/de/model/762054
Take a look at my Collection of parts for the Artillery Sidewinder X4:
Artillery Sidewinder X4 Mods Kollektion von waintdeir | Printables.com
Consider leaving a ⭐⭐⭐⭐⭐ rating and upload a make to collect some prusameters 🙂