Scale up Shortsword and Black Knight Sculptured Triangular Shield (Multi-color)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,32 € – 0,39 € netto (bez VAT)
Dla pliku: sword_bottom_12inch_0.4n_0.15mm_PLA_MINI_26m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,36 € netto (środek widełek).
- Masa podana przez autora
- 3 g
- Czas druku podany przez autora
- 25,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Weapons accessories that would fine the scale of a lego-style figure scaled to 12" in height.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
Print Setting
Short Sword
Nozzle diameter: 0.4mm
Layer height: 0.15mm
Support: Yes for the body of the sword. No for the rest. (see the settings in the 3mf file)
Brim: No
Infill: Any
Multi-color: No
Material: PLA (Silk PLA recommended for its shiny look.)
Filament used in the example:
- Silver: Mika3D Silk PLA - silver
- Gold: Mika3D Silk PLA - gold
Triangular Shield
Nozzle diameter: 0.4mm
Layer height: 0.15mm
Support: Yes for the handle. No for the rest. (see the settings in the 3mf file)
Brim: No
Infill: Any
Multi-color: Yes
Material: PLA (Silk PLA recommended for its shiny look)
Filament used in the example:
- Silver: Mika3D Silk PLA - silver
- Blue: Prusament PLA - Royal Blue
- Yellow: Prusa PLA (not Prusament) - Yellow
- Red: Amazonbasic PLA - Red
Assembly Instruction
Print all parts of the item plus a twist screw. Connect the bottom and the body with the screw. As the screw is no visible after the assembly, it can be used as the wipe object for print with MMU.