Parametric woodworking marking-gauge /w fast-lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small marking-gauge adapter which you can adjust to your favorite ruler/lineal of choice.
- Ocena
- 4,875 / 5
- Polubienia
- 1795
- Pobrania
- 4869
- Wydruki
- 30
- Wyświetlenia
- 15 638
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a marking-gauge for woodworking purposes to mark the same measurements against different edges.
I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in Fusion360 and add enough parameters to be able to create new gauges for each new lineal. I also don't wanted to use screws but after some iterations I needed to add a steel-nail as pivot axis to make it strong enough.
I printed the hinge with 90% infill and the body 30% infill. I put the body on its side during the print, so I could print it without supports. You can tweak your printers clearance in the source file if needed.
---
This is a technical remix of the “wayofwood” gauge but I created it using Fusion360:
https://wayofwood.com/3d-diy-printed-marking-gauge/