Hidden blade OTF system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
THIS IS NOT A FINISHED MODEL This hidden blade I made in Inventor is fully working when the right tollerances are…
- Ocena
- 5 / 5
- Polubienia
- 195
- Pobrania
- 689
- Wydruki
- 0
- Wyświetlenia
- 10 249
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
THIS IS NOT A FINISHED MODEL
This hidden blade I made in Inventor is fully working when the right tollerances are used, when printing this yourself you have to try to scale the models down or up by a bit.
I cannot assure you this model will work perfectly directly, you will probably have to modify it a bit.
For assembly:
Place base on flat surface, inerst spring in notch, put blade in base, put slide on blade so when the slide moves it activates the spring. place curc_to_lin on slide and screw down lin_hold. the rest shouldnt be hard to assemble.
Use pictures or the assembly.stl for refrence when in doubt.
Print Settings
Printer:
Anycubic Kossel
Rafts:
No
Supports:
Yes
Resolution:
0.1 - 0.3 (deppends on piece)
Infill:
/
Filament: / PLA /
Category: Props