HDZero Goggle SpeedyBee Analog VRX cover.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original yellow cover does not fit the HdZero Goggle analog bay-adapter. This cover resolves this problem.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 300
- Wydruki
- 1
- Wyświetlenia
- 1309
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-)
The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so it fits better. If you print it yours will fit better.
I've used the blank cover by Cerberus from Thingiverse, but I additionally modified the catches as every single one of them broke. So my version uses large flat pieces of plastic instead. I found this works much better.
My Gcode file is a print made with cheap PlastSpaw PETG filament pictured. I've increased the Z distance to improve ability to remove the supports. Still you'll need pliers to remove them. Do it carefully not to break the model :-)
I'm attaching STEP and my original FreeCAD file if anyone wants to remix it.