1 / 3
Rear Brake Line Mount for RXB250 and Similar Bikes — zdjęcie 1
1 / 3

Rear Brake Line Mount for RXB250 and Similar Bikes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement brake line mounting clip. I'm pretty sure these are just completely unobtanium, so you can print your own.

Ocena
0 / 5
Polubienia
3
Pobrania
26
Wydruki
0
Wyświetlenia
178
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

A while back I had an… incident… wherein the exhaust fell off my RXB250 and melted the rear brake line as well as one of its little mounts. The line is easy enough to replace, but the mounts are hen's teeth. Not available anywhere.

I drafted up a replacement, and here it is. It works just like OEM. Surprisingly, printing this in ordinary PLA has held up just fine for many miles.

Note that due to the pin on the bottom you're either going to have to get very clever with your print orientation or just use supports.

Tagi