Drill & Driver Wall Control Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang your drills and drivers securely on a Wall Control surface
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 312
- Wydruki
- 3
- Wyświetlenia
- 1221
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This uses the DDD Printable Wall Control System (github) to mount the drills and drivers.
The mounting width is about 42mm, this works well for the tools that I own. I've tried it with the Makita XFD10Z drill and and sub-compact XDT18ZB, as well as Black and Decker model.
Use a good percentage infill to keep this rigid, at least 40%.
For the sidepieces, I used standard 4x4 angle brackets (Left, Right, Center).
I'd recommend using the locking spacers facing the wall surface, I used the 2x3 size. This can be used to lock in the mount using the threaded pin. Two of the 2x3 could fill in all the wall mounting points, but I don't feel it would add a great deal to the support.
If you have another similar set that you'd like to mount, contact me with dimensions and I can post a version for you.