Hex Key Universal T-Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an attempt at a universal T-handle for hex keys (also known as Allen wrenches).
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 1333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an attempt at a universal T-handle for hex keys (also known as Allen wrenches). This handle accommodates every size in common sets, from SAE 0.05in to 3/8in and Metric 1.5mm to 10mm.
Note that the fit must be somewhat loose to meet the goal of universal fit. If you want a tight fit, there are a lot of well-made T-handle options for each individual wrench size available, but a quick search didn't reveal any universal ones. Since I don't use hex keys very often, I opted for one efficient size to save space in my tool cabinet.
The first version of this incorporates 6 intermediate-sized holes spaced out, which provides a somewhat better fit at the cost of being asymmetrical. A second version uses only one center hole.
Print Settings
Rafts: No
Supports: No
Resolution: 200
Infill: 100
Filament: Hatchbox PLA Black
Notes:
I printed at 100% infill for strength because it could be subjected to a lot of torque, but less infill might be fine.