Alfa Romeo 145/146 speaker nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alfa Romeo 145/146 Speaker Mounts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Two of the white pieces that the speakers mount to in my Alfa 145 broke so i had to improvise and make a new improved one from scratch.
The design is in two pieces that screw together onto the door panel of the car, the big one from the front and the "screw" from the back.
Once mounted whats left is an M6 threaded hole, so if you are not using any type of spacer for the speaker you will need an M6x10 bolt maximum because the hole is approx 10.7mm deep.
I printed it in PLA+ and it works about right, but it would be much better to print it in ABS if you can.
DISCLAIMER
I know that this is not the best solution to the problem because it is a plastic piece and it breaks very easily, so when screwing in the screws you have to be very careful and ideally hold the piece with pliers so that it does not rotate and break.
It's a replacement for Alfa Romeo OEM part number 60592970.