18650 Battery, 2 Row, Opposing Spring Latch Battery Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These battery boxes are printed as separate parts that are printed in orientations chosen to maximize strength.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 162
- Wydruki
- 3
- Wyświetlenia
- 1304
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Look in https://www.printables.com/social/261776-brass_ring/collections/224415 for other sizes.
These battery boxes are printed as separate parts that are printed in orientations chosen to maximize strength and then snapped together.
The all parts can be printed with no supports. I printed with 0.20 layer height in PETG and PLA.
Assembly instructions:
If there is any droop on the bridging of the hoop on the box top, it must be trimmed to level. Push the tab of the latch through the latch hoop on the box lid until the latch tab fully locks in place.
Category: Tool Holders & Boxes