1 / 7
1/8 DIN Benchtop Enclosure with Print in Place Legs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 1/8 DIN Enclosure with Print-in-Place Legs, 10 Degree Elevation
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 464
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A simple benchtop 1/8 Din Enclosure
Note: There are two version! I highly recommend printing the Print-in-place version as the legs can be difficult to snap in afterwards. There is a 0.20mm clearance between the legs and the outside of the enclosure and a 0.25mm clearance on the ball radius of each leg joint. See pictures for suggested support generation.
Design Features:
- 10 degree angled legs, about 3-5 degree when folded down. Helps with viewing on your bench/desk
- Print in Place design (use supports from build plate only!)
- 1/8 Din Cut out
- Countersunk mounting rails (#4 clearance)
Parts:
- 10C2 Fused Power Adapter (https://www.digikey.com/en/products/detail/delta-electronics/10C2/2560386)
- 1/8 Din Electronics
- x4 2-56 Heatset inserts (https://www.mcmaster.com/93365A112/)
- (Optional) 7/32" Wire Grommet (https://www.mcmaster.com/9600K114/)