Lanard Max Shot MegaXL Dart Barrel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part was designed to replace the barrel/spigot of the Lanard Max Shot.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This part was designed to replace the barrel/spigot of the Lanard Max Shot. I didn't have any of the original missiles this blaster came with, so I designed this part to make the blaster compatible with MegaXL darts as well as standard Nerf darts.
This part requires the small retention pieces to be slotted into the four openings around the base of the main body. Two of each of the styles of retention piece are necessary to print, and they are keyed to only fit in their respective openings.
These parts are compatible with the stock hardware and internals of the blaster, and the parts were designed to need minimal or no support when printed.
This blaster doesn’t pop up very much anymore, nor does it seem to get the same amount of love that it’s predecessor does, but I found it to be a super fun blaster to both modify and play with. I hope these parts allow others to enjoy this blaster as much as I have!