Killdozer Treads Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple fix for the track/treads of the excellent Killdozer remix by MakerKJS.
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 299
- Wydruki
- 7
- Wyświetlenia
- 5712
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is a simple fix for the track/treads of the excellent Killdozer remix by MakerKJS (www.thingiverse.com/thing:4851061)
I wanted to print a mini Killdozer, and when I scaled the model down to 50% a thin area of the treads turned into a gap in PrusaSlicer. This fix just gets rid of that thin slice of track.
I would probably recommend you not scale it down to 50% like I did, because some pieces become very thin, and this model requires a ton of supports making post-processing a delicate process. I had to glue a couple pieces back together. Overall, I enjoy how it turned out, although it looks a bit sloppy because scaling it down this much caused some layer artifacts.
I used a couple sample spools from the Paramount3D sampler pack. Egg Yolk Yellow for the Killdozer body, Black for the tracks, and Battleship Gray for the armor plating. Makes a great conversation piece, if the conversation is to be about how you might be a sociopath...
Print Settings
Rafts: No
Supports: No
Resolution: 200
Infill: 20
Filament: Paramount3D PLA