1 / 4
Curtain rails window bracket - 12mm rod holder clip (Gardinen Stangen Halter)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip to mount curtain rods with 12mm diameter to a window. Using double sided tape strips
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (2)Kolekcje (34)Powiązane
Inspired by a model by @GruselKarren, which seems to aim to recreate an already existing and marketed design.
https://www.printables.com/model/211396-curtain-rod-holdergardinen-stangen-halter
The goal of this newly created model is to offer a FDM printer optimized curtain rail hook.
- No supports needed to print the round clip.
- 3mm thick clip, can be printed in PLA.
- Distribution of clip force along the layer lines, not the stacked layers.
- Minimized glue base size to look smaller and be less obvious.
- Chamfered edges to prevent pointy and sharp corners
- Fits half cut Tesa Powerstrips
@astra0810 made a remix with larger contact surface you should take a look at in case my design appears too slim for your usecase (i.e. heavy curtains).