Magnetic Quick Release USB Pass Through V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,70 € – 0,86 € netto (bez VAT)
Dla pliku: V2 Mount.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,78 € netto (środek widełek).
- Masa podana przez autora
- 7 g
- Czas druku podany przez autora
- 54,6 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A magnetic USB connector for both the Buckfink and AliExpress 6x70mm Q1R Quick Release
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 1720
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I often switch between two wheel rims for rally and GT/Formula, and it often bothered me having to unscrew the WEIPU USB connector and attach it to the other wheel.
As I watched the review of another wheel with a magnetic connector, I had the idea to build a magnetic connector for my needs.
Spent some time in Tinkercad, and this is the result.
Update 2024-02-23: Version 2 released
Due to the long lever, the original version was prone to pick up vibrations from the wheel base (e.g. when driving Rally) and lost connection for a split second every now and then. No fundamental issue, but the Windows USB sound was a bit nerve wrecking.
Version 2 mitigates this issue by a shorter and more sturdy construction, also now the connectors meet in an angle which is more in alignment with the movements of the quick release parts when being attached or detached.
Update 2024-02-29: added Version 2 for Buchfink Q1R
Thanks to a fellow redditor who volunteered as a guinea pig, this 1mm shorter version fits the 40mm distance of the original Buchfink Q1R.
Update 2024-03-21: added slightly lower versions
With the support of Philip and the arrival of a black QR set from the DynoRacing Store, I was able to mitigate the issue of this version's slightly off tolerances. Maybe due to the paint or other causes, this QR's distance is not exactly 42mm, but up to .5mm less.
I added two additional versions with .15 / .25 less height for balance.
When mounted without the magnetic connectors installed yet, the faces of the 3D printed parts should be exactly parallel and 6mm apart.
Other materials used
Magnetic Connectors
The connectors are available at AliExpress: https://www.aliexpress.com/item/1005005605267060.html (4pin with ear 2.54mm)
I attached the connectors with M1.5 screws.
Quick Release: (6x70mm bolt pattern)
- “Original” version: https://www.aliexpress.com/item/1005005769391280.html
- “Original” version on eBay: https://www.ebay.com/itm/386250963642
- Cheaper version with potentially off tolerances: https://www.aliexpress.com/item/1005005050672495.html