Anycubic Resin Bottle Funnel (1L , 500ml & 250ml)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This we designed to prevent clogging and allow maximum airflow so there no more waiting for your resin to drain. The…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This we designed to prevent clogging and allow maximum airflow so there no more waiting for your resin to drain.
The ribs in the funnel will prevent the resin soaked screen from laminating to the funnel wall and the funnel angle make sure that at least one side of the filter cone is free of the side. (tested with included anycubic filters and aftermarket ones on Amazon both worked great)
The bottle attachment has integral venting so you wont has to wait for air bubbles even if you manage to saturate the cone area.
This was designed to fit 1L, 500ml, and 250ml Any cubic resin bottles. Some have a different different size opening so the inside funnel spout fits tight inside the 1L, and 500ml bottles and the outside funnel housing fits tight to the outside of the larger mouth on the 250ml bottle.
Since you will undoubtedly be soaking this in rubbing alcohol it might be worth increasing your wall count or printing it solidly to prevent it filling the voids through a pinhole somewhere. that said I printed with default settings on Prusa MK3 and it seems perfectly watertight.
If might be worth running a heat gun or small butane torch over the whole surface to make sure there all no boogers and strings that might contaminate your resin.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Supports:
No
Resolution:
.15
Infill:
20
Filament:
MakerGeeks Raptor PLAlight green
Notes:
Since you will undoubtedly be soaking this in rubbing alcohol it might be worth increasing your wall count or printing it solidly to prevent it filling the voids through a pinhole somewhere. that said I printed with default settings on Prusa MK3 and it seems perfectly watertight. rnrnIf might be worth running a heat gun or small butane torch over the whole surface to make sure there all no boogers and strings that might contaminate your resin.
Category: 3D Printer Accessories