K40 Mirror Shroud and Alignment Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a little mirror shroud to keep dust off the mirrors and to aid in alignment. During alignment, it's very handy…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a little mirror shroud to keep dust off the mirrors and to aid in alignment. During alignment, it's very handy to have a perpendicular surface to work with and the added distance prevents your mirrors from getting smoked up from the burning paper.
NOTE: For alignment, I use the little round dot stickers (seen the image) you can get in any stationary or office supply section of a store but masking tape, or bits of post-it notes would work fine too.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
50
Filament: MakerGeeks Raptor PLA Blue
Category: Parts