Star-Lord Booster (one piece, prints flat, no supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My sons like to play star-lord/guardians of the galaxy/avengers around the house and one of them wants to be Peter…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
My sons like to play star-lord/guardians of the galaxy/avengers around the house and one of them wants to be Peter Quill for Halloween so I made this model of Star-Lords boot Jets.
I had printed some other models found on Thingiverse in the past, but they seem to all require assembly, had no alignment pins, and would always break along the layers/or solvent welds when the kids played with them.
I specifically designed this one to print flat for strength and not require any supports, or assembly so they are easy to replace if lost damaged or broken.
It's was based off a screenshot from the movies so while it might not be 100% movie accurate its close enough for my needs.
Its sized for an adult at the moment at 150mm (~6in) but it works fine scaled down to 80% for kids (as pictured)
Feel free to remix https://a360.co/2PFzaMx
P.S. this does print with a flat on the back for easy mounting/printing
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
.15mm
Infill:
20%
Notes:
My sons like to play star-lord/guardians of the galaxy/avengers around the house and one of them wants to be Peter Quill for Halloween so I made this model of Star-Lords boot Jets. rnrnI had printed some other models found on Thingiverse in the past, but they seem to all require assembly, had no alignment pins, and would always break along the layers/or solvent welds when the kids played with them. rnrnI specifically designed this one to print flat for strength and not require any supports, or assembly so they are easy to replace if lost damaged or broken.rnrnIt's was based off a screenshot from the movies so while it might not be 100% movie accurate its close enough for my needs. rnrnIts sized for an adult at the moment at 150mm (~6in) but it works fine scaled down to 80% for kids (as pictured)rnrnFeel free to remix https://a360.co/2PFzaMxrnrnP.S. this does print with a flat on the back for easy mounting/printing
Category: Costume