SpaceX Raptor Vacuum Engine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Standard Digital File License
3D model of the Raptor Vacuum Engine from Starship designed for 3D printing. Model can be assembled with standard super glue.
Default Dimensions (L x W x H):
- 1:16 scale: 5.5 x 5.5 x 11 in (140 x 140 x 280 mm)
Check out my other rocket engine models at In3DSpace.com
F-1 Engine available for free
Print instructions
Assembly Instructions: bit.ly/raptor-vacuum (Also in Files tab)
Recommended Print Settings:
Raptor Vacuum Nozzle Bottom:
- Nozzle Diameter: 0.4mm
- Layer Height: 0.2mm
- Infill: 15%
- No supports required
- Add a brim if you have trouble keeping it attached to the print bed
Raptor Vacuum Nozzle Top:
- Nozzle Diameter: 0.4mm
- Layer Height: 0.2mm
- Infill: 15%
- No supports required
- Add a brim if you have trouble keeping it attached to the print bed
Raptor Powerpack:
- Nozzle Diameter: 0.4mm
- Layer Height: 0.15mm
- Infill: 15%
- No supports required
- Print slower if you have trouble with pipe overhangs